|
KE280 Commercial Electric Knife Sharpener |
|
|
|
The KE280 is a totally new concept in professional knife sharpening featuring a patented cushion contact system, which not only produces edges sharper than when the knife was new, but also creates a polished finish - eliminating the need for honing." £229.95 + VAT + Carriage How the 280 Knife Sharpener works... There are 2 closed-cell rubber covered wheels, each carrying endless abrasive rolls. The left wheel sharpens the left side of the blade and the right wheel, the right side.
The drive motor produces enormous torque (see tech info) which allows the use of fine abrasive – this, together with the cushion contact system produces a razor sharp smooth cutting edge which does not require honing on a steel.
During sharpening, the knife is supported at the correct angle by the check plates. Cleaning and replacement of the abrasives is simplicity itself, taking less than 1 minute. Other than this, there is no maintenance required.
Virtually all knives and most cleavers can be bought to razor sharpness by an unskilled operator – in seconds.
*Japanese steel knives can be sharpened perfectly on the KE280. Special sharpening instructions are enclosed with each machine. See also Spares and Accessories | If only all solutions were as inexpensive and effective as the KE280.  Technical Information - Pressure moulded frame in polyurethane
- Extremely powerful electric motor torque 3000 gcm
- Abrasive wheels rpm 250
- Geared transfer drive
- Drive shaft in hardened steel with 2 pinions carried in 3 phosphor bronze bearings
- Drive axles in hard steel with crown wheel drive transfer
- UK voltage and fuse protected (5a). 3 pin plug provided
- Weight – unpacked 2.2kg
- 12 month guarantee
| |
|
